– If you need more information, use these Hitec resources –
Web Site: http://www.hitecrcd.com/
Phone: 858-748-6948
Postal Address:
Hitec 12115 PAINE STREET
POWAY, CA 92064

SPECS: Wire color codes: Black-Ground, Red-Power, Yellow-Signal Operating speed: 0.17 sec @ 60° @ 4.8V Torque: 41.6 oz-in (3 kg-cm) Weight: 0.84oz (24g) Length: 1.18" (30mm) Width: 0.39" (10mm) Height: 1.33" (34mm) Wire length: 12" (305mm) approximate

FEATURES: 360° continuous rotation Dual ball bearing equipped motor INCLUDES: HSR-1425CR Robotic Servo with Hitec/JR/Z connector 0.94" (24mm) diameter round horn four gromments, four eyelets and four 2x15mm mounting screws REQUIRES: Installing in robot and connecting to receiver and linkage SPECS: Operating Voltage: 4.8 - 6.0V Operating Speed: 43.4 RPM +10% Output Torque: 38.88 oz-in (2.8 kg-cm) Weight: 0.33oz (41.7g) Size: 1.59 x 0.77 x 1.44" (40.6 x 19.8 x 36.6mm)

INCLUDES: 1 HS-225BB servo with pre-installed circular horn 1 Straight horn 1 "X" horn 1 Adjustable arm 4 Black rubber grommets 4 Brass servo eyelets 4 Servo mount screws SPECIFICATIONS: Length- 32.4mm (1.3") Weight- 27g (0.95oz) Width - 16.8mm (0.7") Torque- 3.9 kg-cm (56.4 oz-in) Height- 30.8mm (1.2") Speed - 0.14 sec/60°

INCLUDES: One HS-225MGS metal gear micro servo Four screws, grommets, and eyelets Three servo arms and one wheel SPECS: L: 32.4mm x W: 16.8mm x H: 30.8mm (1.27" x 0.66" x 1.21") Transit: 0.14sec/60° (4.8V) 0.11sec/60° (6.0V) Torque @ 4.8V: 3.9 kg-cm, (54.2 oz-in) @ 6.0V: 4.8 kg-cm, (66.7 oz-in) Weight: 31g (1.09oz)

SPECS: Speed: 0.19 sec/60° at 4.8V Speed: 0.15 sec/60° at 6.0V Torque: 42.00 oz-in at 4.8V Torque: 51.00 oz-in at 6.0V Length: 1.60" (41mm) Width: 0.80" (20mm) Height: 1.40" (37mm) Weight: 1.5oz (43g)

SPECS: Speed: 0.19 sec/60° at 4.8V Speed: 0.15 sec/60° at 6.0V Torque: 42.00 oz-in at 4.8V Torque: 51.00 oz-in at 6.0V Length: 1.60" (41mm) Width: 0.80" (20mm) Height: 1.40" (37mm) Weight: 1.5oz (43g)

INCLUDES: One HS-422S Servo w/Universal Connector One Servo Accessory Bag SPECS: Length: 41mm (1.6") Weight: 45.5g (1.605oz) Width: 20mm (0.8") Torque: 3.1 kg-cm (43.4 oz-in) Height: 36.5mm (1.4") Speed: 0.20 sec/60°

SPECS: Length: 41mm (1.6") Weight: 45.5 (1.60oz) Width: 20mm (0.8") Transit Time: 0.20sec Height: 36.5mm (1.4") Torque: 43.4 oz-in COMMENTS: This servo shares the same case with the HS-300 servos. The biggest difference is that this servo has dual ball bearings, making it faster, with more torque, and less slop.

INCLUDES: One Servo with "X" horn One extra "X" horn One extra horn mount screw Two mounting screws SPECS: Length: 20.9mm (.82") Weight: 5.8g (0.20oz) Width: 11.4mm (.44") Torque: 0.6 kg-cm (8.4 oz-in) Height: 22mm (.87")(to top of case) Speed: 0.09sec/ 60°

Este produto estara disponivel em Fevereiro

Este produto estara disponivel no fim de Fevereiro.

FEATURES:
Programmable
Ball Bearing
Overload Protection
Metal Gears
Light Weight
For use with Park Flyer Models, Indoor Planes, Small Gliders,
Micro Electric Heli and MAV

INCLUDES:
One HS-5065MG digital micro servo
Four screws
Two servo arms
SPECS:
23.6mm x 11.6mm x 24mm (0.92" x 0.45" x 0.94")
Speed @ 4.8V: 0.14sec/60°
Speed @ 6V: 0.11 sec/60°
Torque @ 4.8V: 1.8 kg-cm (24.99 oz-in)
Torquw @ 6.0V: 2.2 kg-cm (30.55 oz-in)
Weight: 11.9g (0.42oz)

SPECS: Length: 1.18"(30mm) Width: 1.33"(34mm) Height: .39" (10mm Weight: 24g (.84oz) Output speed: .17 sec 60 degrees at 4.8V Output torque: 41.66 oz-in (3 kg-cm) at 4.8V Pulse data: 3-5V peak to peak square wave pulse. Pulse duration is from 0.9mS to 2.1mS with 1.5mS as center. Pulse refreshes at 50Hz (20mS) Voltage range: 4.8-6V Wire color: Black is Ground, Red is center, Power, third wire is Signal Direction rotation: Hitec servos turn in a clockwise direction COMMENTS: Servo will work in gliders or wings, or any thin aircraft wing.

SPECS: Wire color codes: Black-Ground, Red-Power, Yellow-Signal Operating speed: 0.15 sec @ 60° at 4.8V Torque: 61 oz-in (4.4 kg-cm) Weight: 1.12oz (32g) Length: 1.27" (32.4mm) Width: 0.66" (16.8mm) Height: 1.21" (30.8mm) Wire length: 12" (305mm) approximate

SPECS: Speed: 0.23sec/60 degrees at 4.8V Torque: 4.4 kg-cm (61 oz-in) at 4.8V Length: 38.8mm (1.52") Width: 19.8mm (0.77") Height: 36.0mm (1.41") Weight: 40g (1.41oz)

SPECS: Speed: 0.17 sec at 60° Output Torque: 15.27 oz-in (1.1 kg-cm) Weight: 0.27oz (7.8g) Length: 0.89" (22.8mm) Width: 0.45" (11.6mm) Height: 0.94" (24mm)

SPECS: Speed: 0.17 sec/60° at 4.8V Speed: 0.14 sec/60° at 6.0V Torque: 109.7 oz-in at 4.8V Torque: 130.53 oz-in at 6.0V Length: 1.59" (40.6mm) Width: 0.77" (19.8mm) Height: 1.48" (37.8mm) Weight: 2.11oz (60g)

SPECS: Speed: 0.23 sec/60° at 4.8V Speed: 0.18 sec/60° at 6.0V Torque: 143.03 oz-in at 4.8V Torque: 164.2 oz-in at 6V Length: 1.59" (40.6mm) Width: 0.77" (19.8mm) Height: 1.48" (37.8mm) Weight: 2.11oz (60g)