DX7 7Ch Heli w/AR7000 & 4-DS821 MD2

Key Features
20-Model memory
Airplane and Heli software
Switch assignment
P-mixes
Includes 4 powerful DS821 digital servos with high-tech resin gears
3-axis dual rate & expo
3-position flap (Airplane)
5-point throttle curve (Heli)
3 flight modes plus hold (Heli)
Gyro programming (Heli)
CCPM, 2-servo 90°, 3-servo 90°, & 3-servo 120°
Configured to default, helicopter model type (all airplane programming is available)

This is the Sullivan Field Pump for Glow Fuel. FEATURES: Reversible Gear Pump design. Works from 6V to 12V Ultrasonically welded pump head Direct drive prevents slipping FILL-OFF-EMPTY 3 position switch and pre-installed alligator clips INCLUDES: Sullivan Field Pump for Glow Fuel REQUIRES: Medium Fuel Tubing (GPMQ4131) SPECS: Length: 3-3/4" (95mm) Width: 1-3/8" (34mm) Height: 1" (25mm) Pump capacity 33 ounces per minute at 12V COMMENTS: This is for Glow Fuel only. Do not use gasoline.

Ultra Fuel Pump (Manual Gas & Glow)

Overview
Hangar 9's new Ultra Fuel Pump can be used with both gasoline and glow fule and features overdrive gearing and transfers fuel quickly.
The pump is ergonomically designed to be easy to hold on to while fueling and comes with a two year warranty, making it a fantastic value also.
Hangar 9's Ultra Fuel Pump is a great addition to any field box.

X9503 2.4 A/S Tx 9 channel with R921 Rx No Servos
9 canais.
50 memorias
3 modos (Aviao,Heli e Planador) acompanha hum receptor R921
SEM SERVOS.

This is a Hobbico TorqMaster 180 Deluxe 12V Starter. It is designed for starting Glow or Gas Engines up to 1.8 cubic inches in size. *** 2-Year Warranty *** FEATURES: An Aluminum Starter Cone with V-Groove for Boat Starter Belts and Round Rubber Insert for Airplane Spinner Cones Starter has Self-Adjusting Carbon Brushes for Longer Lasting Useage and Constant Contact with the Armature Easy-Press Start Switch makes Starting Easy Without Requiring Heavy Finger Pressure and a built-in Finger-Guard promises Safe Starts INCLUDES: One TorqMaster 180 Deluxe 12V Starter w/5' Cord & Banana Plugs

This is a Hobbico TorqMaster 180 Deluxe 12V Starter. It is designed for starting Glow or Gas Engines up to 1.8 cubic inches in size. *** 2-Year Warranty *** FEATURES: An Aluminum Starter Cone with V-Groove for Boat Starter Belts and Round Rubber Insert for Airplane Spinner Cones Starter has Self-Adjusting Carbon Brushes for Longer Lasting Useage and Constant Contact with the Armature Easy-Press Start Switch makes Starting Easy Without Requiring Heavy Finger Pressure and a built-in Finger-Guard promises Safe Starts Pre-Attached Alligator Clips for easy attachment to a 12V battery INCLUDES: One TorqMaster 180 Deluxe 12V Starter w/5' Cord & Alligator Clips

This is a Hobbico TorqMaster 90 Deluxe 12V Starter. It is designed for starting Glow Engines up to .90 cubic inches in size. *** 2-Year Warranty *** FEATURES: An Aluminum Starter Cone with V-Groove for Boat Starter Belts and Round Rubber Insert for Airplane Spinner Cones. Starter has Self-Adjusting Carbon Brushes for Longer Lasting Useage and Constant Contact with the Armature. Easy-Press Start Switch makes Starting Easy Without Requiring Heavy Finger Pressure and a built-in Finger-Guard promises Safe Starts. Pre-Attached Alligator Clips for easy attachment to a 12V battery INCLUDES: One TorqMaster 90 Deluxe 12V Starter w/5' Cord & Alligator Clips. SPECS: Winding Resistance: 1.3 ohms Brush width: 3/16" Weight: 3lbs and 6oz Current Draw: 11.6A load Armature length: 2" RPM: no load 4500rpm, load 3100rpm # of commutator contacts: 10 or 12 Measured torque: 310 oz-in at stall Shaft thread size- 6mm-1.0mm

The Sullivan Dynatron is a Heavy-Duty, Super High-Torque 12V or 24V Starter that will Start All Model Engines, Including 1/4 Scale. FEATURES: Super High-Torque 12V or 24V Starts All Model Engines, from .09 to 1/4 Scale "Instant-ON" Fingertip Control Switch Full Protection Hand-Guard for Extra Safety Standard grey rubber reversible insert Aluminum pulley groove drive cone Front plate guard adaptable for left handed use Two year warranty 46" wire lead (not coiled) INCLUDES: One Dynatron Super Power Starter w/Aluminum V-Groove Drive Cone Two Alligator Clips with Red and Black plastic sleeves Instruction sheet and warranty card REQUIRES: One or Two 12V Batteries Installing and soldering alligator clips SPECS: Shaft Size: 5/16" 46" wire cord 4800 RPM no load (volts not specified) Torque: 340 (12V) 680 (24V)

The Sullivan Deluxe Heavy-Duty, High-Torque 12V Starter will Start Model Engines Up to .60 Size. FEATURES: High-Torque 12V Starts Model Engines Up to .60 Size "Instant-ON" Fingertip Control Switch Full Protection Hand-Guard for Extra Safety INCLUDES: One Deluxe Power Starter w/Aluminum V-Groove Drive Cone Two Alligator Clips REQUIRES: One 12V Battery

This starter features a heavy-duty, long-life, 12V motor; high torque and RPM; "instant on" strip switch; hand guard to keep your hands away from the prop; pressure grip; molded parts; and a two-year guarantee. It starts airplanes and cars and has a molded nylon cone. TORQUE..........230 oz-in HORSEPOWER......2/5HP RPM.............4400

INCLUDES:
Futaba 7C 2.4GHz Transmitter
R617FS FASST 7-Ch Receiver (FUTL7627)
NR-4J 600mAh 4.8V NiCd Receiver Battery (FUTM1280)
FBC-19B(4) 120V Battery Charger (FUTM1830)
Four S3004 Standard Ball Bearing Servos (FUTM0004)
NT8S600B 600mAh 9.6V NiCd Transmitter Battery (FUTM1457)
Heavy Duty Switch Harness w/Charge Cord (FUTM4385)
Black Transmitter Neck Strap (FUTM5690)
Servo mounting hardware and instruction manual

Version 2:

3" x 1-1/2" x 1/2" (camera only), 1 oz. V.2

Changes include:
larger resolution, LCD display, rotating lens, longer battery life, and a thermal activated motion detector.

Video camera includes audio, still photos, a voice recorder, USB drive, and a Webcam.

Unit is small enough to mount on just about any model airplane, small parkflyers, RC cars, trains, skate boards, or even a kite.

Can be remotely activated using an additional servo.

Videos are recorded with a resolution of 640x480 for clear playback, complete with sound, and 1280x1024 pixels for still photos.

Camera lens rotates 90 degrees so you can take photos or video from multiple angles.

Built-in rechargeable 200 mAh Li-Ion battery that charges via the USB port on your computer in about 1 to 1-1/2 hours.

For video and audio-recordings, FlyCamOne2 requires a minimum sustained write speed of 9 megabytes (MB) per second and a read speed of 10MB per second (not included).

With a 2GB SD card (not included) the video recording time is about 30 minutes. Webcam use requires the included software and USB cable.

No software required for all other uses! You can edit and compress the .avi video files using Windows Movie Maker, included with Windows XP SP2 and Windows Vista.______________________________________________________

SPECS: Displacement: 1.218 cu in (19.96cc) Bore: 1.197" (30.4mm) Stroke: 1.083" (27.5mm) Practical RPM: 1,800 - 9,500 RPM Power Output: 3.1ps/9000 RPM Weight of engine: 22.82oz (647g) without muffler,extension or adaptor Weight of muffler: 7.074oz (219.2g) with 90° adapter installed Weight of muffler: 7.907oz (245g) with extension installed Crankshaft thread size: 5/16-24 Distance Between Mounting Holes Same Side: 0.98" (25mm) Distance Between Mounting Holes Opposite Side: 2.3" (58mm) Distance Center of Crankcase to End of Crankshaft: 4.3" (109.5mm) Distance Center of Crankcase to Drive Hub: 2.7" (69.8mm) Width Between Mounting Tabs: 2.6" (67mm) Width of Crankcase Below Mounting Tabs: 1.8" (46.5) Length from Backplate to End of Crankshaft: 5.5" (139.9mm) Length from Backplate to Drive Hub: 3.9" (100.2mm) Height/Bottom of Crankcase to Top of Cylinder Head: 4.3" (109.2mm) Height/Bottom of Mounting Tabs/Top of Cylinder Head: 3.4" (85.7mm) Distance center to center of muffler mounting holes: 48mm (1.89")

SPECS: Displacement: 1.218 cu in (19.96cc) Bore: 1.197" (30.4mm) Stroke: 1.083" (27.5mm) Crankshaft thread size: 5/16-24 Practical RPM: 1,800 - 9,500 RPM Power Output: 3.1ps/9000 RPM Weight: 22.82oz (647g) 7.074oz (219.2g) with 90° adapter installed 7.907oz (245g) with extension installed Distance Between Mounting Holes Same Side: 0.98" (25mm) Distance Between Mounting Holes Opposite Side: 2.3" (58mm) Distance Center of Crankcase to End of Crankshaft: 4.3" (109.5mm) Distance Center of Crankcase to Drive Hub: 2.7" (69.8mm) Width Between Mounting Tabs: 2.6" (67mm) Width of Crankcase Below Mounting Tabs: 1.8" (46.5) Length from Backplate to End of Crankshaft: 5.5" (139.9mm) Length from Backplate to Drive Hub: 3.9" (100.2mm) Height/Bottom of Crankcase to Top of Cylinder Head: 4.3" (109.2mm) Height/Bottom of Mounting Tabs/Top of Cylinder Head: 3.4" (85.7mm)

SPECS: Displacement: 0.455 cu in (7.45cc) Bore: 0.866" (22mm) Stroke: 0.772" (19.6mm) Practical RPM: 2000-17000 Power Output: 1.65ps/16000 RPM Weight: 13.2oz (375g) without muffler Weight: 17.2oz (489g) with muffler Recommended Propellers: 10.5x6, 11x6-8, 12x6-7, use 10x6 for break-in Crankshaft Size: 1/4-28

SPECS: Displacement: 9.95cc (0.607 cu in) RPM range: 2,000 - 17,000 Bore: 24.0mm (.945") Stroke: 22mm (.866") Horsepower: 1.90 BHP at 16,000 RPM Weight: 19.4oz, 23.6oz w/muffler Length: 84mm (3.31") the distance from the backplate to drive washer Width: 43.0mm (1.69") width of engine neglecting engine mounting flanges 52.0mm (2.05") distance between centers of the mounting holes Height:100.5mm (3.956") Exhaust port: 29.5mm x 9.0mm rect Crankshaft Thread Size: 5/16-24 43.8mm btwn exh mounting holes Props: Tuned Pipe: 12x9, 12x10, 12x11 Sport: 12x6, 12x7, 12x8, 13x6, 13x7 Break-In: 11x7,br /. ________________________________________________________________________

SPECS: Bore: 30.4mm (1.20") Stroke: 27.5mm (1.08") Power Output: 2.1 BHP at 12,000 RPM Practical RPM Range: 2,000 - 12,000 RPM Weight-Without Muffler: 32.5oz (921g) Weight-With Muffler: 35.3oz (1000g) Crankshaft Thread Size: 5/16-24 Valve Clearance: Between .04mm and .1mm (or between .0015" and .004", measured between the valve tip and rocker arm) Length: 102mm (4.09") from backplate to the front of the drive washer Width: 47mm (1.85") width of engine neglecting the mounting flanges 58mm (2.28") distance between the mounting hole centers Height: 139.5mm (5.49") Suggested Prop(s): 14x9, 14x10, 14x11, 15x8, 15x9, 15x10, 16x6, Construction: Aluminum and Aluminum alloys

SPECS: Bore: 27.7mm (1.09") Stroke: 24.8mm (.976") Displacement: 14.95cc (0.912 cubic inch) Power Output: 1.6 BHP at 11,000 RPM Practical RPM Range: 2,000 - 12,000 RPM Crankshaft Thread Size: 5/16-24 Weight-With Muffler: 24.2oz (686g) Weight-Without Muffler: 22.6oz (641g) Valve Clearance: Between .04mm and .1mm (or between .0015" and .004", measured between the valve tip and rocker arm) Length: 91.5mm (3.60") from backplate to front of drive washer. Width: 42.6mm (1.68") width of engine neglecting the mounting flanges 52mm (2.05") distance between the mounting hole centers Height: 123mm (4.88") Suggested Prop(s): Stunt planes: 11x11-12, 12x10-12, 13x9 Scale models: 13.5x8, 14x7, 15x6, 16x6, (12x8 & 12.5x7-3 blade) Construction: Aluminum and Aluminum alloys

SPECS: Bore: 27.7mm (1.09") Stroke: 24.8mm (.976") Displacement: 14.95cc (0.912 cubic inch) Power Output: 1.6 BHP at 11,000 RPM Weight-Without Muffler: 22.9oz (649g) Weight With Muffler: 24.6oz (697g) Practical RPM Range: 2,000 - 12,000 RPM Crankshaft Thread Size: 5/16-24 Valve Clearance: Between .04mm and .10mm (between .0015" and .004", measured between the valve tip and rocker arm) Length: 91.5mm (3.60") from backplate to front of drive washer. Width: 42.6mm (1.68") width of engine neglecting the mounting flanges 52mm (2.05") distance between the centers of the mounting holes Height: 123mm (4.88") Suggested Prop(s): Stunt planes: 11x10, 11x11, 12x9.5, 12x10, 12x11 Scale models: 13.5x8, 14x7, 15x6, 16x6, (12x8 & 12.5x7-3 blade) Construction: Aluminum and Aluminum alloys